BJFDW - 3M BRAND EC-1648-A STRUCTURAL (SEE SUPP)
- MSDS: BJFDW
- Manufacturer: 3M ADHESIVES COATINGS AND SEALERS DIV
- Product Name: 3M BRAND EC-1648-A STRUCTURAL (SEE SUPP)
- National Stock Number: 8040-00-835-4573
Product Identification
Product ID:3M BRAND EC-1648-A STRUCTURAL (SEE SUPP)
MSDS Date:08/22/1988
FSC:8040
NIIN:00-835-4573
Kit Part:Y
MSDS Number: BJFDW
Responsible Party
ST PAUL, MN 55144-1000
US
Emergency Phone: 612-733-1110
Info Phone: 612-733-1110
Cage: 04963
Contractor
Telephone: 866-556 5712 / 612-733-1110
Cage: 76381
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PROLONGED OR REPEATED SKIN CONTACT MAY
CAUSE AN ALLERGIC SKIN REACTION IN SOME INDIVIDUALS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES:DIRECT CONT W/ PASTE-POSS SEV IRRIT.HEATED
VAP DURING CURING & DUST FROM GRINDING/SANDING/CUTTING OF CURED
PROD-POSS IRRIT.SKIN:PRLNGED/RPTD CONT-POSS IRRIT & ALLERGIC
REACTION IN SOME PERSONS.IN GEST:POSS DIGEST SYS IRRIT.INHAL:NO
SIGNIFICANT EXPOS AT ROOM TEMP.IF HEAT CURES USED,FUME MAY CAUSE
RESP SYS (SEE SUP)
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:EYES:IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES WHILE HOLDING EYELIDS OPEN.IMMEDIATELY CALL A
PHYSICIAN.SKIN:WASH AFFECTED AREA WITH SOAP AND WATER.INGESTION:DO
NOT INDUCE VOMITING .CALL A PHYSICIAN.INHALATION:REMOVE PERSON TO
FRESH AIR.CALL A PHYSICIAN.
Fire Fighting
Extinguishing Media:WATER,CARBON DIOXIDE,FOAM.DRY CHEMICALS.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE KNOWN.HAZARDOUS DECOMPOSITION
PRODUCTS:CARBON MONOXIDE,CARBON DIOXIDE AND METALLIC PARTICULATE
WHEN EXPOSED TO FLAME.
Accidental Release
Spill Release Procedures:VENTILATE THE AREA.OBSERVE THE PRECAUTIONS
FROM OTHER SECTIONS.COLLECT SPILLED MATERIALS.PLACE IN A U.S.
DEPARTMENT OF TRANSPORTATION APPROVED METAL CONTAINER AND SEAL.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:PREVENT CONTACT WITH EYES AND
SKIN.AVOID BREATHING HEATED VAPORS RELEASED DURING CURING
OPERATIONS.KEEP CONTAINER TIGHTLY CLOSED WHEN NOT IN USE.
Other Precautions:KEEP FROM CHILDREN.FOR INDUST/PROFESSIONAL USE
ONLY.OBSERVE PREC FOR EACH PART WHEN SEPARATE/MIXED.VENT CURING
OVEN TO ATMOSPHERE/EMISSION CONTROL DEVICE.DO NOT RECIRCULATE
EMISSIONS TO WORKROOM.AVOID EYE CONTACT W/ OR BRTHG DUST (SEE SUP)
Exposure Controls
Respiratory Protection:WEAR DUST MASK FOR GRINDING,SANDING OR CUTTING
OPERATIONS ON THE CURED PRODUCT.
Ventilation:USE SUFFICIENT VENTILATION TO PREVENT VAPOR BUILDUP.
Protective Gloves:IMPERVIOUS GLOVES TO PREVENT CONTACT.
Eye Protection:CHEMICAL SAFETY GOGGLES
Other Protective Equipment:N/K
Work Hygienic Practices:REMOVE CONTAMINATED CLOTHING AND LAUNDER BEFORE
REUSE.
Supplemental Safety and Health
PART NO:EPOXY ADHESIVE.EFTS OF OVEREXPOS:IRRIT.DUST FROM MACHINING
CURED PROD MAY CAUSE RESP IRRIT.WASTE DISP METH:A SANITARY
LANDFILL.MIX UNCURED BULK PROD W/ FLAMM MATL & INCIN IN AN
INDUST/COMMERCI AL FACILITY.OTHER PREC:FROM
GRINDING/SANDING/CUTTING CURED PROD.WEAR EYE PROT & DUST MASK.%
VOLAT BY WT:0%.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Spec Gravity:1.04 (WATER=1)
Solubility in Water:NIL
Appearance and Odor:GREEN,VISCOUS PASTE WITH AN AMIDE (PUNGENT) ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CARBON MONOXIDE,CARBON DIOXIDE AND
METALLIC PARTICULATE WHEN EXPOSED TO FLAME.
Conditions to Avoid Polymerization:WILL NOT OCCUR.
Disposal
Waste Disposal Methods:DISP MUST BE IAW FED,STATE & LOC
REGS.COORDINATION W/ SUPPORTING INSTALLATION &/OR MACOM
ENVIRONMENTAL COORDINATION PRIOR TO DISP IS REC TO DETERM APPROP
DISP METH .MIX PART A W/ PART B.COMPLETE LY CURE.DISP OF FULLY
CURED WASTE PROD IN (SUP DA)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.